LGMG SR3369E, Руководство по эксплуатации и безопасности

Страница: 55 / 64

LGMG North America Inc. Operation and Safety Manual
49
9.1 Do not operate unless
You have understood and practiced the
principles of safe operation of the machine in
this manual.
1
）
Avoid dangerous situations.
2
）
Always perform pre-operation checks
3
）
Inspect the workplace.
4
）
Always perform pre-operation functional
tests.
5
）
Use the machine only for the design
purpose.
9.2 Basic principles
1) This machine is an electric drive lifting
device that is equipped with a working
platform on the scissor mechanism. The
vibration generated when the machine is
working will not be dangerous to the
operator who is standing on the work
platform. This machine can be used to load
workers and their portable tools to a certain
height from the ground, or to reach a
certain working area above the machine or
equipment.
2)
The “Operating Instruction” section
provides specific instructions for all aspects
of machine operation. It is the operator’s
responsibility to follow all safety rules and
instructions
in the Operation and
Maintenance Manual.
3) In addition to lifting personnel and tools to
the overhead workplace, it is unsafe or
even dangerous to use this machine for
other purposes.
△
! Caution: This machine is strictly
prohibited from carrying goods.
4) Only trained and qualified/authorized
personnel can operate the machine. If more
than one operators use the same machine
at different times during the same work shift,
they must be qualified/authorized operators
and follow all safety rules and instructions
in the Operation and Maintenance Manual.
This means that every new operator should
perform pre-operation inspections,
functional tests and workplace inspections
before operating the machine.
9.3 Emergency stop
1) On the ground control unit or platform
control unit, push the red emergency stop
button to the “OFF” position to stop all
functions.
2) The function should be fixed if it is still
working when any of the red emergency
stop buttons is pressed.
9.4 Emergency lowering
1) On the ground control unit, turn the key
switch to the platform control unit.
2) Make sure the ground and platform red
“Emergency Stop” buttons are pulled out to
the “ON” position.
3) Move and hold the emergency lowering
function enable button switch.
4) Move and hold the emergency lowering
button switch.
9.5 Operation on the ground
1) Make sure the battery is connected before
operating the machine.
2) Turn the key switch to the ground control
unit.
3)
Pull the red “Emergency Stop” buttons on
the ground and platform to the “OFF”
position.
Adjust the platform position
4) Press and hold the lifting function enable
button.
5) Press the platform up or down button.
The drive and steering functions are not
available through the ground control unit.
9.6 Operation on the platform
1) Make sure the battery is connected before
operating the machine and turn the key
switch to the platform control unit.
2) Pull out the red "Emergency Stop" buttons
on the floor and platform to the “ON”
position.
Adjust the platform position