LGMG SR3369E, Руководство по эксплуатации и безопасности

Страница: 61 / 64

LGMG North America Inc. Operation and Safety Manual
55
10.1 Compliance
1) When the machine is lifted by a crane or
forklift, maintain normal judgment and
planning to control the movement of the
machine.
2) Only personnel with high-altitude lifting
qualifications can load and unload the
machine.
3) The transport vehicle must be parked on a
level surface.
4) When loading the machine, the transport
vehicle must be fixed to prevent movement.
5) Make sure the vehicle's capacity, loading
surface, chain or belt is sufficient to
withstand the weight of the machine.
Please see the "Specification" for the
weight of the machine.
6) The machine must be parked on a level
surface or fixed before releasing the brake.
7) Do not drive the machine on slopes where
the machine is going uphill, downhill or on
the slope rating. See the “Driving on a
Slope” in the “Operating Instructions”.
8) If the slope of the transport vehicle exceeds
the maximum slope rating, the winch must
be used to load and unload the machine as
described in “Brake Release Operation”.
9) Prevent the guide rail from falling when
removing the latch. Always hold the guide
rail when folding it.
10.2 Fixed to a truck or trailer
during transportation
1) The machine wheels must always be
blocked when preparing for transport.
2) Secure the machine to the transport
surface with the tie points on the chassis.
3) Use at least 4 chains or belts. Make sure
the chain or belt used has sufficient load
strength.
4)
Turn the key switch to the “OFF” position
and remove the key before transporting.
10.3 Ensure the
transportation safety
1) The machine wheels must always be
locked when preparing for transport.
2) Retract and fix the extension platform.
3) Before transporting, turn the key switch to
the "OFF" position and remove the key.
4) Thoroughly inspect the machine to prevent
loose or unsecured parts.
5) Secure the machine to the transport
surface with the tie points on the chassis.
6) Use at least four chains or belts.
7) Make sure the chain or belt used has
sufficient load strength.
8) If the platform guide rail has been folded,
secure it with a belt before transporting.
Compliance
1) Only qualified hook operators can
assemble the lock and lift the machine.
2) Make sure the crane's lifting capacity,
loading surface, belt or rope is sufficient to
withstand the weight of the machine.
Please see the serial number plate.