LGMG SR3369E, Руководство по эксплуатации и безопасности

Страница: 45 / 64

LGMG North America Inc. Operation and Safety Manual
39
7.1 Do not operate unless
You have known and practiced the rules for safe
operation of machine in the Operation Manual.
1) Avoid the dangers.
2) Always check before operation.
3) Inspect the work place.
4) Know and understand the workplace
inspection and then perform the next
operation.
5) Always perform the function test before
operation.
6) Use the machine only as per the design
intent of the machine.
7.2 Basic Principles
1) The workplace inspection helps operators
determine whether the workplace ensures
safe operation of machine. The operator
shall carry out the work before moving the
machine to the workplace.
2) Knowing and remembering the hazards in
the workplace is the responsibility of the
operator, who can be aware of and avoid
them
when moving, installing, and
operating machines.
7.3 Workplace inspection
Beware and avoid the following dangerous
situations
1) Steep slopes or caves
2) Protrusions, ground obstacles or debris
3) Declining surface
4) Unstable or smooth surface
5) Aerial obstacles and high voltage lines
6) Hazardous area
7) Surface support insufficient to withstand the
full load applied by the machine
8) Wind and weather conditions
9) There are unauthorized personnel
10) Other possible unsafe conditions