LG WK2 S6 Series Скачать руководство пользователя страница 8

Страница: 8 / 80

SAFETY INSTRUCTIONS

Leaving clothes that has been dried in the appliance unattended

could result in fire. Clothes not removed from the appliance after

drying could result in fire. Remove clothes immediately after drying,

and then hang or lay the clothes flat to cool.

• This appliance is intended to be used in household only.

Maximum Capacity

The maximum capacity in some cycles for dry clothes to be used is

Wash : 22 kg, Dry : 11 kg (Dry Clothes) / 22 kg (Wet Clothes)

Installation

• Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

• This appliance should only be transported by two or more people

holding the appliance securely.

• Do not install the appliance in a damp and dusty place. Do not install

or store the appliance in any outdoor area, or any area that is subject

to weathering conditions such as direct sunlight, wind, rain, or

temperatures below freezing.

• Make sure the power plug is completely pushed into the power

outlet.

• Do not plug the appliance into multiple outlet sockets, power boards,

or an extension power cable.

• Do not modify the power plug provided with the appliance. If it does

not fit the power outlet, have a proper outlet installed by a qualified

electrician.

• This appliance is equipped with a power cord having an equipment-

earthing / grounding conductor (earthing pin) and a grounding

power plug. The power plug must be plugged into an appropriate

outlet socket that is installed and earthed / grounded in accordance

with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualified electrician or

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 8 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: