LG WK2 S6 Series Скачать руководство пользователя страница 75

Страница: 75 / 80

TROUBLESHOOTING

ENGLISH

Greasy or dirty spots

on clothes.

Fabric softener used incorrectly.

• Check and follow the instructions provided with your fabric softener.

Clean and dirty clothes are being dried together.

• Use your dryer to dry only clean items. Soil from dirty clothes can transfer

to the clean clothes in the same or later loads.

Clothes were not properly cleaned or rinsed before being placed in the

dryer.

• Stains on dried clothes could be stains that were not removed during the

washing process. Make sure that clothes are being completely cleaned or

rinsed according to the instructions for your washer and detergent. Some

difficult soils may require pre-treating prior to washing.

Clothes are shrinking.

Garment care instructions are not being followed.

• To avoid shrinking your clothes, always consult and follow fabric care

instructions. Some fabrics will naturally shrink when washed. Other fabrics

can be washed but will shrink when dried in a dryer. Use a low or no heat

setting.

Lint on clothes.

Lint filter not cleaned properly.

• Remove the lint from the filter before every load. With the lint removed,

hold the filter up to a light to see if it is dirty or clogged. If it looks dirty,

follow the cleaning instructions in the

MAINTENANCE

section. With some

loads that produce high amounts of lint, it may be necessary to clean the

filter during the cycle.

Laundry not sorted properly.

• Some fabrics are lint producers (i.e., a fuzzy white cotton towel) and should

be dried separately from clothes that are lint trappers (i.e., a pair of black

linen pants).

Excess static in clothes.

• Use a fabric softener to reduce static electricity. Be sure to follow the

manufacturer’s instructions. Overdrying a load of laundry can cause a

buildup of static electricity.

The appliance is overloaded.

• Divide extra large loads into smaller loads for drying.

Tissue, paper, etc., left in pockets.

• Check pockets thoroughly before washing and drying clothes.

Symptoms

Possible Cause & Solution

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 75 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: