LG WK2 S6 Series Скачать руководство пользователя страница 74

Страница: 74 / 80

TROUBLESHOOTING

Performance

The appliance will not

turn on.

Power cord is not properly plugged in.

• Make sure that the plug is securely plugged into a grounded outlet

matching the appliance's rating plate.

House fuse is blown, circuit breaker has tripped, or power outage has

occurred.

• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the

problem is a circuit overload, have it corrected by a qualified electrician.

The appliance does not

heat.

House fuse is blown, circuit breaker has tripped, or power outage has

occurred.

• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the

problem is a circuit overload, have it corrected by a qualified electrician.

Gas supply or service is turned off.

• Confirm that the house gas shutoff and the shutoff valves of the dryer are

both fully open. Even if gas is not supplied to the appliance, it will run and

no error codes will display. Verify that other gas appliances in the home are

working normally.

Ahorro de Energía (Energy Saver) option is selected. (on some models)

• If using the

Normal

cycle, deselect the

Ahorro de Energía (Energy Saver)

option that is selected by default. This option reduces energy use by

adding an air dry section to the beginning of the cycle. It is normal to feel

no heat at the beginning of the cycle while in

Ahorro de Energía (Energy

Saver)

mode.

Drying time is not

consistent.

Heat settings, load size, or dampness of clothing is not consistent.

• The drying time for a load will vary depending on the size of the load, the

type of fabrics, the wetness of the clothes and the condition of the lint

filter. An unbalanced load in the washer can cause poor spinning, resulting

in wetter clothes which will take longer to dry.

Symptoms

Possible Cause & Solution

Clothes are wrinkled.

Clothes dried too long (overdried).

• Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter

drying time or use a lower dry level setting and remove items while they

still retain a slight amount of moisture.

Clothes left in dryer too long after cycle ends.

• Use the

Anti Arrugas (Wrinkle Care)

option. This option will tumble the

clothes briefly every few minutes for up to 3 hours to help prevent

wrinkling.

Symptoms

Possible Cause & Solution

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 74 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: