LG WK2 S6 Series Скачать руководство пользователя страница 67

Страница: 67 / 80

TROUBLESHOOTING

ENGLISH

Operation

Thumping sound

Heavy clothes may produce a thumping sound. This is usually normal.

• If the sound continues, the appliance is probably out of balance. Stop and

redistribute the clothes.

The clothes may be out of balance.

• Pause the programme and redistribute the clothes after the door unlocks.

Vibrating noise

Package materials are not removed.

• Remove package materials.

The clothes may be unevenly distributed in the drum.

• Pause the programme and redistribute the clothes after the door unlocks.

Not all levelling feet are resting firmly and evenly on the floor.

• See the

Levelling the Appliance

instruction to adjust the levelling of the

appliance.

Floor not rigid enough.

• Check if the floor is sold and does not flex. See the

Installation Place

Requirements

to select the proper location.

Symptoms

Possible Cause & Solution

Symptoms

Possible Cause & Solution

Water is leaking.

House drain pipes are clogged.

• Unclog waste pipes. Contact plumber if necessary.

Leakage is caused by improper installation of drain hose or clogged

drain hose.

• Clean and straighten the drain hose. Check and clean the drain filter

regularly.

Drain pump filter cap is not fitted correctly.

• Refit the drain pump filter.

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 67 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: