LG WK2 S6 Series Скачать руководство пользователя страница 16

Страница: 16 / 80

INSTALLATION

Closet Ventilation Requirements

Closets with doors must have both an upper and

lower vent to prevent heat and moisture buildup in

the closet. One upper vent opening with a
minimum opening of 310 cm

must be installed no

lower than 6 feet above the floor. One lower vent
opening with a minimum opening of 155 cm

must

be installed no more than one foot above the floor.

Install vent grills in the door or cut down the door

at the top and bottom to form openings. Louvered

doors with equivalent ventilation openings are also

acceptable.

NOTE

• There should be at least a little space around the

appliance (or any other appliance) to eliminate

the transfer of vibration from one appliance to

another. If there is enough vibration, it could

cause appliances to make noise or come into

contact, causing paint damage and further

increasing noise.

• No other fuel-burning appliance can be installed

in the same closet as an appliance.

Wooden Floors (Suspended

Floors)

When installing the appliance on wooden floors,

use rubber cups to reduce excessive vibration and

unbalance. Timber or suspended type flooring may

contribute to excessive vibration and unbalance,

errors and malfunction.

• To reduce vibration, we recommend placing at

least 15 mm thickness of rubber caps

under

each adjusting foot of the appliance, secured to

at least two floor beams with screws.

• If possible, install the appliance in one of the

corners of the room, where the floor is more

stable.

• Fit the rubber cups to reduce vibration.

CAUTION

• If the appliance is installed on the unstable floor

(e.g. wooden floor), the warranty does not cover

any damages and cost occurred due to the

installation on the unstable floor.

NOTE

• You can purchase rubber cups (part No.

4620ER4002B

) from the LG service centre.

Electrical Connection

• Do not use an extension cord or double adapter.
• Always unplug the appliance and turn off the

water supply after use.

• Connect the appliance to an earthed socket in

accordance with current wiring regulations.

• The appliance must be positioned so that the

plug is easily accessible.

• Power outlet must be within 1 meter of either

side of the appliance.

C: Distance to

Ventilation Opening

7.6 cm

D: Front Clearance

10 cm

Description

Dimension/

Clearance

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 16 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: