LG WK2 S6 Series Скачать руководство пользователя страница 23

Страница: 23 / 80

INSTALLATION

ENGLISH

Venting the Dryer

WARNING

• Gas dryers MUST exhaust to the outdoors.
• DO NOT use sheet metal screws or other

fasteners which extend into the duct that could

catch lint and reduce the efficiency of the

exhaust system. Secure all joints with duct tape.

• To reduce the risk of fire, combustion, or

accumulation of combustible gases, DO NOT

exhaust dryer air into an enclosed and

unventilated area, such as an attic, wall, ceiling,

crawl space, chimney, gas vent, or concealed

space of a building.

• To reduce the risk of fire, DO NOT exhaust the

dryer with plastic or thin foil ducting.

• Do not exceed the recommended duct length

limitations noted in the chart. Failure to follow

these instructions may result in extended drying

times, fire or death.

• Do not crush or collapse ductwork.
• Do not allow ductwork to rest on or contact

sharp objects.

• If connecting to existing ductwork, make sure it

is suitable and clean before installing the dryer.

• Venting must conform to local building codes.
• Use only 10 cm rigid, semi-rigid or flexible metal

ductwork inside the dryer cabinet and for

venting outside.

• The exhaust duct must be 10 cm in diameter with

no obstructions. The exhaust duct should be

kept as short as possible. Make sure to clean any

old ducts before installing your new dryer.

• Rigid, semi-rigid or flexible metal ducting is

recommended for use between the dryer and

the wall. All non-rigid metal transition duct must

be UL-listed. Use of other materials for transition

duct could affect drying time.

• Ductwork is not provided with the dryer. You

should obtain the necessary ductwork locally.

The vent hood should have hinged dampers to

prevent backdraft when the dryer is not in use.

• The total length of flexible metal duct must not

exceed 2.4 m.

Ductwork

Wall Cap Type

Number of 90°

Elbows

Maximum length of 10 cm diameter rigid

metal duct

Recommended

19.8 m

16.8 m

14.3 m

11.0 m

8.5 m

Use for only short run

installations

16.8 m

14.3 m

12.5 m

9.1 m

6.7 m

a: 4 ‘’ (10 cm)

b: 2 1/2 ‘’ (6.4 cm)

Содержание WK2 S6 Series

















































































Результаты поиска

Содержание WK2 S6 Series

Отзывы:

LG WK2 S6 Series, Руководство пользователя, Страница: 23 / 80

Результаты поиска

Содержание WK2 S6 Series

Отзывы: