LG Centric 32LP645H Скачать руководство пользователя страница 38

Страница: 38 / 77

206-4232

Teach Master TV Setup to Target TV

1. Turn ON the Target TV.
The next step depends on whether the EZ-Manager Wizard appears on the

screen:
• If the wizard is displayed, the TV is in the required factory default state. If

desired, you can complete the Teaching process via the EZ-Manager Wizard

(see “USB Configuration” on page 17). To continue with this procedure, exit

the wizard: Use the arrow keys on the Installer Remote to select

Exit

from

the Welcome screen and press

. In the confirmation pop-up window,

select

, and then press

once more on the Installer Remote.

Then, go to step 3.

• Otherwise, ensure the Target TV is in Pass-through Mode, and then

continue with step 2.

2. Use the Installer Remote to access the Target TV Installer Menu (see

“Accessing the Installer Menu” on page 20 for further information). Set

Installer Menu item

117 FACT DEFAULT

, and press

. When the

value changes back to 0, press

again to exit the Installer Menu.

Note:

This step restores factory default settings on the TV.

3. Tune/set the TV to an analog or digital channel or Aux input (ideally the same

source tuned for 2-5-5 + MENU Mode during the Master TV Setup procedure).

4. Insert the USB memory device with the .tll file into the Target TV USB IN

port.

5. Press

MENU SETTINGS

on the Installer Remote to display the TV setup

menus. Use the arrow navigation keys to select/highlight the

Option

icon, and then press the number “

” key a total of seven times to display the

USB Download Menu.

6. Use the Up/Down arrow keys to select

Teach To TV

(TLL)

, and then press

7. Use the Up/Down arrow keys to select the Master TV Setup you want to

install, and then press

. Note: Filenames identify the TV, the TLX

version, and, in the case of the 60LP645H model, the chassis size.

Teaching status will be shown on a progress bar in a new window. When the

Teaching process is complete, the USB Download menu will reappear on

the screen.

8. When Teaching is done, press on the Installer Remote to exit the USB

Download Menu, remove the USB memory device from the Target TV, and

turn OFF the TV.

9. After a few seconds, turn ON the TV, and verify that the Master TV Setup is

now resident on the Target TV.

Note:

When you turn it back ON, the TV will tune according to the setting of

Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel is

specified, the TV will tune to that channel; otherwise, the TV will return to the

last channel tuned.

USB Cloning Procedures (Cont.)

USB Download Menu

Upgrade TV Software
Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Teach To TV (TLL)

xxLP645H-UA00001.TLL

UPDATING...

Do not remove the USB from the port!

Do not unplug!

50%

Teach To TV

Содержание Centric 32LP645H














































































Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды

LG Centric 32LP645H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды