LG Centric 32LP645H Скачать руководство пользователя страница 26

Страница: 26 / 77

206-4232

Installer Menu (Cont.)

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting Aux source. When turned ON, the TV will tune to

starting Aux source if item 004 STRT CHANNEL is set to 0.
1 = Video 1

4 = RGB

7 = HDMI 3

3 = HDMI 1

5 = HDMI 2

255 = Last Aux

Note:

Above is applicable only if all Aux sources are enabled.

Note:

This item is not available in the Installer Menu unless item

004 STRT CHANNEL is set to 0.

047 - AUX STATUS

Set to 1 for MPI Aux source to be reported as a channel number

instead of channel 0. Set to 0 to disable Aux identification change.

Controls MPI status channel response for Aux inputs.

053 - DIS. CH-TIME (Disable Channel-Time)

Set to 1 to disable the Channel-Time display; Channel-Time display

will not appear. Set to 0 to enable the Channel-Time display.

069 - EN. CH-T COL. (Enable Channel-Time Custom Color)

Set to 1 to enable custom color for the Channel-Time display. Set

to 0 to disable custom color for the Channel-Time display.

070 - FOR. CH-TIME (Channel-Time Display Foreground Color)

Set according to Color Chart:
0 = Black

3 = Cyan

6 = Yellow

1 = Blue

4 = Red

7 = White

2 = Green

5 = Violet

Note:

If foreground color and background color are the same, the

menu background will be transparent.

Note:

Applies only to “Channel Not Available” message if item

073 CH NOT AVBLE is set to 1 (enabled). Also, items 070 FOR.

CH-TIME and 071 BCK. CH-TIME are not available in the Installer

Menu when item 069 EN. CH-T COL. is set to 0.

071 - BCK. CH-TIME (Channel-Time Display Background Color)

See description for item 070 FOR. CH-TIME above. The color

chart is the same for both items.

073 - CH NOT AVBLE (Channel Not Available)

If set to 1 and item 028 CH. OVERIDE is set to 0, a “NOT AVAIL-

ABLE” message is displayed when a user direct tunes a channel

that is not in the channel scan list available in memory.

Note:

This item is not available in the Installer Menu when item

028 CH. OVERIDE is set to 1.

075 - REVERT CH (Revert to Start Channel)

If set to 1 and loss of MPI communication occurs, TV automatically

tunes to the specified Start Channel.

Note:

This item is not available in the Installer Menu when item

004 STRT CHANNEL is set to 255.

078 - UPN MSB (UPN Most Significant Byte)

User programmable number, most significant byte readable by

MPI command. Note: Not linked to serial number.

079 - UPN MSB-1 (UPN Most Significant Byte-1)

User programmable number, most significant byte-1 readable by

MPI command. Note: Not linked to serial number.

080 - UPN MSB-2 (UPN Most Significant Byte-2)

User programmable number, most significant byte-2 readable by

MPI command. Note: Not linked to serial number.

081 - UPN LSB (UPN Least Significant Byte)

User programmable number, least significant byte readable by

MPI command. Note: Not linked to serial number.

082 - CHKSM ERROR (Checksum Error)

Enforces rigid MPI checksum validation. Set to 1 for validation.

Set to 0 to disable (does not check checksum on MPI async port).

SPI is always checked.

083 - HANDSHK TIME (Handshake Time)

Adds an additional delay to the handshake time which is 64 msec,

thus relaxing MPI timing requirements to be compatible with PC-

based Windows controlled systems. Range is 0 - 5.

(Timeout = 25.5MS + [25.5 MS* Handshake time].)

084 - PERMANENT BLK (Permanent Block)

Allows Lock (Parental Control) blocking schemes to be permanent

by disabling the blocking hours function. Set to 1 to install Parental

Control restrictions permanently. Set to 0 for user-specified hours

control of blocking schemes.

087 - REAR RGB EN. (Rear RGB Enable)

Controls access to rear RGB input on TV. Set to 0 to disable RGB

input. Set to 1 to enable RGB input. Set to 17 to initiate a one-

time automatic configuration after an AC power cycle; otherwise,

automatic adjustment will be performed each time the RGB input

is accessed.

088 - EN NOISE MUTE (Enable Noise Mute)

If set to 1, audio mutes if no signal is present.

090 - KEY LOCK

If set to 1, Key Lock is enabled, which means that all display panel

buttons will be locked, i.e., non-functional. Set to 0 to disable Key

Lock. Note that all IR features remain functional regardless of this

setting.

091 - HDMI2 ENABLE

Set to 1 to enable HDMI 2 input in DTV Mode. Set to 2 to enable

HDMI 2 input in PC Mode. Set to 0 to disable display panel HDMI

2 input.

Содержание Centric 32LP645H














































































Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды

LG Centric 32LP645H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды