LG Centric 32LP645H Скачать руководство пользователя страница 35

Страница: 35 / 77

206-4232

USB Cloning Procedures

Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File

USB Cloning Notes

• Read the IMPORTANT CLONING INFORMATION on page 34 before beginning

any cloning procedures. In particular, ensure that the Master TV Setup does not

contain a Channel Map; otherwise, Teaching will result in the Target TV(s) being

configured for FTG Mode via CPU.

• If a TV Zone # (for location-specific configuration) has been set in the Master

TV before the Learning process is initiated, the Zone designation will be used

during the subsequent Teaching process(es). This means that in order for the

“Learned” clone data with the TV Zone assignment to be applied, any Target

TVs will need to be assigned the same Zone designation BEFORE Teaching

is performed. Refer to Reference section, “Using the TV Zoning Feature,” for

further information. See also bullet below.

• If you intend to use the TV Zoning feature, make sure to assign a TV Zone #

as described in Reference section, “Using the TV Zoning Feature,” BEFORE

continuing with the Learning procedure below. See also bullet above.

• You may edit the filename as part of the Learning procedure; however, a file

with edited contents will not be recognized.

• It is not possible to clone a Master TV’s clock using a USB memory device.

Either set a Target TV’s clock manually, or use the Auto Clock setting in the TV

setup menus.

Learn Setup from Master TV

1.  Ensure the Master TV is set up completely and in Pass-through Mode.
2.  Insert the USB memory device into the USB IN port on the Master TV.
3.  Press

MENU SETTINGS

on the Installer Remote to display the TV setup

menus. Use the arrow navigation keys to select/highlight the

Option

icon, and then press the number “

” key a total of seven times to display the

USB Download Menu.

4. To gain access to the “Learn From TV” option in the USB Download Menu, key

in the password used to access the Installer Menu (Example: Press

5. Use the Up/Down arrow keys to select

Learn From TV

(TLX)

, and then

press

6. To differentiate this .tlx file from others, you can use the Up/Down arrow keys

to change the last five digits of the filename. Press

when you are ready

to initiate Learning.

Learning status will be shown on a progress bar in a new window. When the

Learning process is complete, the USB Download menu will reappear on the

screen.

7. When Learning is done, press on the Installer Remote to exit the USB

Download Menu, and remove the USB memory device from the Master TV.

Select the file name and press OK to start

xxLP645H-UA00003.TLX

►

UPDATING...

Do not unplug!

25%

USB Download Menu

Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)

Learn From TV (TLX)

Learn From TV

Содержание Centric 32LP645H














































































Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды

LG Centric 32LP645H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды