LG Centric 32LP645H Скачать руководство пользователя страница 17

Страница: 17 / 77

206-4232

EZ-Manager Wizard (Cont.)

USB Configuration

Before you begin, note the following:
• Each of these functions requires that you have the appropriate file(s) loaded on a USB memory

device. If you wish to perform a software upgrade from the USB Download Menu, the software

upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory

device. Cloning (.tll/.tlx) or FTG Configuration (.tlx) files should simply be stored in the root directory

of the USB device.

• If you intend to use the TV Zoning feature on this TV, make sure to assign the TV Zone # in the

EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB Configuration.

See “TV Configuration Options” on page 13 for further information.

• Refer to “Creating an FTG Configuration File using the FTG File Manager” on pages 45 to 46 for

information on creating an FTG Configuration (.tlx) file that can be used for FTG Mode via CPU

configuration. Also note that to configure the TV for FTG Mode via CPU, the FTG Configuration file

must contain an FTG Channel Map. If it does not, any Installer Menu and/or TV setup menu settings

contained in the file will be transferred to the TV (as with typical cloning); however, the TV will remain

in Pass-through Mode and will not be configured for FTG Mode via CPU.

• Refer to “Custom Master TV Setup” on pages 29 to 32, for information on creating a .tll file that can

be used for cloning.

• Ensure the USB device to be used has been formatted with FAT format.

With either the TV Configuration Options or the Zone, Label, and Room Number screen on

display, proceed as follows to configure the TV using the USB memory device.
1. Insert the USB memory device that contains the appropriate file(s) into the TV’s USB IN port.
2. Use the arrow keys to select

USB Configuration

, and then press

on the Installer Remote.

You will be redirected to the TV’s USB Download Menu. For further information on USB

Download Menu functions, refer to the appropriate section(s) in this document.

USB Download Menu

Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)

Teach To TV (TLX)

Note:

With the USB Download Menu on display, you can press on the Installer Remote at any

time to return to the EZ-Manager Wizard.

Note:

If you perform a software upgrade from the USB Download Menu, the TV will complete

the upgrade and then reboot. Upon restart, the TV will display the EZ-Manager TV Configuration

Options screen. If desired, you can re-access the USB Download Menu (to perform additional

functions), proceed with configuration via the wizard, or exit the wizard.

Note:

(FTG configuration only) When configuration is complete, the TV tunes according to the

Start Channel setting in the Installer Menu. If a Start Channel is specified, the TV will tune to that

channel; otherwise, the TV will tune to the lowest logical channel in the FTG Channel Map.

3. Remove the USB memory device, and verify that the appropriate configuration is resident on the

TV.

Содержание Centric 32LP645H














































































Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды

LG Centric 32LP645H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание Centric 32LP645H

Отзывы:

Похожие инструкции для Centric 32LP645H

Бренды по названию

Популярные бренды