59
206-4317 Draft A.2
Reference: Auto Input(s) Sensing Feature
This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable
auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux
inputs, set item 042 to 255. For speci
fi
cations on all other available settings (i.e., settings for individual
inputs), refer to the table on the following page.
Note:
When both item 042 AUTO INPUTS
and
item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
PTC INSTALLER MENU
xxLV570H
CPU
-
CTV
042 AUTO INPUTS 241 7654XXX0
UPN 000-000-000-000
ASIC D279
PTC V#.##.###
CPU V#.##.##.##
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled.
The following table identi
fi
es the Installer Menu display code Input # for each Aux input that is available on
the LV570H TV models. The table also identi
fi
es the Installer Menu item associated with each Aux input.
Remember that in order for auto-sensing to be enabled for an input, that input must also be enabled in the
Installer Menu.
Installer Menu
Display Code
Input #
Aux
Input
Installer Menu
Item
Function
0
AV
039
REAR AUX EN
4
RGB
087
REAR RGB EN
6
HDMI 1
035
HDMI1 ENABLE
7
HDMI 2
091
HDMI2 ENABLE
5
HDMI 3
092
HDMI3 ENABLE
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value
241, which enables auto-sensing for all available Aux
inputs. The input #s in the display code (7, 6, 5, 4, 0
in this example) identify the enabled Aux inputs. See
table below for a listing of the LV570H Aux inputs and
their corresponding display code input #s. The table
on the following page shows the display codes for all
item 042 values.
