18
206-4317 Draft A.2
EZ-Manager Wizard (Cont.)
(Continued on next page)
(Continued from previous page)
4. Once all
fi
elds are completed as required, you have two options:
• To save the data entered and exit the wizard, use the arrow keys to select
Exit
and then press
OK
. In the subsequent pop-up con
fi
rmation window, select
Save and Exit
, and then press
OK
once more. The Pro:Centric application and/or E-Z Installation data will be downloaded to the
TV at a later time. This option is useful, in particular, if the Pro:Centric server has not yet been
con
fi
gured.
• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the
arrow keys to select
Next
, and then press
OK
(see also note below).
Note:
With RF con
fi
guration, Pro:Centric server data must be present on the RF channel
selected as the TV’s Data Channel in order for you to select “Next” (you will see a “Data
channel found” message below the Signal Quality indicator). With IP con
fi
guration, Pro:Centric
server data must be present via the wired LAN cable connection in order for you to select
“Next” (you will see a “IP server found” message below the Port
fi
eld).
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Con
fi
guration screen example on page 16). When the Pro:Centric con
fi
guration is complete, an
EZ-Manager Con
fi
guration Complete screen (see example on page 16) is displayed, and after
10 seconds, the wizard exits, and the TV turns OFF.
Note:
With the EZ-Manager Con
fi
guration Complete screen on display, you also have the option
to manually turn off or reboot the TV. If desired, select
Turn Off
or
Reboot
, respectively, and then
press
OK
on the Installer Remote.
USB Con
fi
guration
TV Manager / USB download options enable you to download con
fi
guration or software
fi
les
individually from a USB memory device to the TV. You can also use the Ez Download utility available
from the menu to select one of each type of
fi
le to be downloaded at one time using one process.
Each of the USB download functions requires that you have the appropriate
fi
le(s) loaded on a
USB memory device. If you wish to perform a software update or download a splash screen
image, the software/image
fi
le(s) must be stored in a folder named “LG_DTV” in the root directory
of the USB device. Clone/Con
fi
guration (.tlx)
fi
les should simply be stored in the root directory of
the USB device.
The procedure below assumes that the desired
fi
le(s) is/are already loaded onto the USB device.
For further information on TV Manager / USB download options and
fi
le requirements, and/or for
information on creating Clone/Con
fi
guration (.tlx)
fi
les, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to assign the appropriate TV
Zone # in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with
USB Con
fi
guration. See “TV Con
fi
guration Options” on page 13 for further information.
