50
206-4317 Draft A.2
(Continued from previous page)
IP Con
fi
guration
In the Server IP and Port Number
fi
elds, either key in or use the Left/Right arrow keys to select
the appropriate values for the Pro:Centric server IP address and port number. The IP address
must match the IPv4 multicast address and the port number must match the port number that
is set in the Pro:Centric server.
Note:
If the server IP address and port number have already been set in the EZ-Manager
Wizard, the speci
fi
ed data will be re
fl
ected in the
fi
elds displayed.
Note:
Setting the Media Type to “IP” automatically sets the Data Channel
fi
eld to “253.” You
cannot alter this setting unless you revert Media Type to “RF.” Also, it is not possible to direct
enter “253” in the Data Channel
fi
eld.
4. Select/highlight the
Mode
fi
eld, and use the Left/Right arrow keys to select the appropriate
Pro:Centric Application Mode setting—
Con
fi
guration Only
,
FLASH
, or
GEM
. If the Pro:Centric
Mode is set to “Con
fi
guration Only,” Pro:Centric application data will not be downloaded.
Note:
If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in
the EZ-Manager Wizard, the speci
fi
ed mode will be re
fl
ected in this
fi
eld. If you change the
mode in this menu, Installer Menu item 098 will now re
fl
ect the value you selected here.
5. In the Update Event
fi
eld, use the Left/Right arrow keys to select
On
or
Off
, as required.
Based
on the Update Time settings, the Wake For Update feature wakes the TV once daily to check
for, and if applicable, download updates from the Pro:Centric server. See Installer Menu item
121 UPDATE TIME HR description on page 32 for additional information on Wake For Update
functionality.
If you set Update Event to “On,” specify the appropriate Wake For Update time in the Update
Time
fi
elds, as desired. Note that the Update Time set in this menu is based on a 12-hour clock.
Ensure the AM/PM speci
fi
cation is set accordingly.
6. Once all
fi
elds are completed as required, either select
Close
and then press
OK
on the Installer
Remote or press to return to the IP Environment Menu.
IP Environment Setup (Cont.)
