19
206-4317 Draft A.2
EZ-Manager Wizard (Cont.)
(Continued from previous page)
• Ensure the USB device to be used has been formatted with FAT format.
• When creating
fi
les to be downloaded, avoid using special characters (?, &, @, etc.) in
fi
lenames.
• Refer to “Ez Download Utility” on pages 20 to 22 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 34 to 36 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Con
fi
guration File” on pages 41 to 46 for information on
creating an FTG Con
fi
guration (.tlx)
fi
le for FTG Mode via CPU con
fi
guration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for
splash screen image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
USB Con
fi
guration via EZ-Manager Wizard
With either the TV Con
fi
guration Options or the Zone, Label, and Room Number screen on display,
proceed as follows to con
fi
gure the TV using the USB memory device.
1. Insert the USB memory device with the appropriate
fi
le(s) into the TV’s USB port.
2. Use the arrow keys on the Installer Remote to select
USB Con
fi
guration
, and then press
OK
.
You will be redirected to the TV Manager / USB download options.
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
3. Select the appropriate option from the TV Manager, and initiate the desired download(s).
Update progress will be displayed on the screen. Do NOT remove the USB device while
updates are in progress. When the update process is complete, the TV will reboot. Upon
restart, depending on the type of update(s) completed, either the EZ-Manager TV Configuration
Options screen will be redisplayed (software and/or splash screen image updates only) or the
TV will tune according to the Start Channel setting in the Installer Menu (TV configured with
Clone/Configuration file).
Note:
If the TV Configuration Options screen is redisplayed (software and/or splash screen
image updates only), you can either proceed with configuration via the EZ-Manager Wizard or
exit the EZ-Manager Wizard, as required.
4. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/
are resident on the TV.
Note:
You can press on the Installer Remote at
any time to return to the EZ-Manager Wizard.
