GB-37
CHANNEL
SETUP
CHANNEL SETUP
Setting Digital Channels
(In Digital Mode Only)
Digital channels can be searched and edited only in Digital TV or DigitalTV-C
input mode.
NOTE
Press the
BACK
or
<
button to save the changes and return to the previous
menu. Press the
DTV SETUP
or
EXIT
button to exit from the menu screen.
You can easily select all menu items using the assigned number for each menu.
The default password is 0000. If you have forgotten your password, please
contact your local TV distributor.
Automatic Search
If your TV is connected to the aerial, you can automatically search channels without
entering any other information.
➊
Press the
DTV SETUP
button.
➋
Select
Installation
using the
∧/∨
button and press the
OK
or
>
button.
➌
Select
Installation(DTV-C)
or
Installation(DTV-T)
using the
∧/∨
button and
press the
OK
or
>
button.
➍
Select
Automatic Search
using the
∧/∨
button and press the
OK
or
>
button.
➎
Wait while channel search continues. This may take a few minutes.
➏
While operating search, the cursor is located at
Stop
. Therefore, if you press
the
OK
button during searching, the operation is stopped and the channels
found until then will be displayed.
➐
If search operation is successfully completed and the channel does not exist,
press the
OK
button and try to reset the search operation again if necessary.
➑
You can delete unnecessary channels from the searched channels. Select the
channels to delete and press the
OK
button. Then select
Delete
and press
the
OK
button. To delete all channels, select
Select All
to select all channels,
select
Delete
and press the
OK
button.
➒
When completing channel search and deleting unnecessary channels, select
Save
and press the
OK
button to save the changes.
►
►
►
Installation
Installation (DTV-C)
Installation (DTV-T)
Move to the selected submenu
Automatic Search
Total
Save
Delete
Unselect All
Select All
