Lexmark T642 - Monochrome Laser Printer Скачать руководство пользователя страница 48

Страница: 48 / 55

Understanding printer messages

55 Unsupported option in slot <x>

1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer on.

56 Parallel port <x> disabled

• Press

to clear the message.

The printer discards any data received through the parallel port.

• Make sure the Parallel Buffer menu item is not set to

Disabled

56 Standard parallel port disabled

56 Serial port <x> disabled

• Press

to clear the message.

The printer discards any data received through the serial port.

• Make sure the Serial Buffer menu item is not set to

Disabled

56 USB port <x> disabled

• Press

to clear the message.

The printer discards any data received through the USB port.

• Make sure the USB Buffer menu item is not set to Disabled.

56 Standard USB port disabled

• Press

to clear the message.

The printer discards any data received through the USB port.

• Make sure the USB Buffer menu item is not set to Disabled.

58 Too many disks installed

1 Turn off and unplug the printer.
2 Remove the excess hard disks.
3 Plug in the printer, and turn it on.

58 Too many flash options installed

1 Turn off and unplug the printer.
2 Remove the excess flash memory.
3 Plug in the printer, and turn it on.

58 Too many bins attached

1 Turn off and unplug the printer.
2 Remove the additional bins.
3 Plug in the printer, and turn it on.

58 Too many trays attached

1 Turn off and unplug the printer.
2 Remove the additional drawers.
3 Plug in the printer, and turn it on.

59 Incompatible duplex

• Remove the duplex unit.
• Press

to clear the message and continue printing without using the

duplex unit.

59 Incompatible envelope feeder

Remove the envelope feeder.

Press

to clear the message and continue printing without using the

envelope feeder.

59 Incompatible output bin <x>

• Remove the output bin.
• Press

to clear the message and continue printing without using the

specified output bin.

59 Incompatible tray <x>

Remove the specified tray.

Press

to clear the message and continue printing without using the

specified tray.

61 Remove defective disk

• Press

to clear the message and continue printing.

• Install a different hard disk before you perform any operations that

require a hard disk.

Message

Action

Содержание T642 - Monochrome Laser Printer
























































Результаты поиска

Содержание T642 - Monochrome Laser Printer

Отзывы:

Похожие инструкции для T642 - Monochrome Laser Printer

Бренды по названию

Популярные бренды

Lexmark T642 - Monochrome Laser Printer, Руководство пользователя

Результаты поиска

Содержание T642 - Monochrome Laser Printer

Отзывы:

Похожие инструкции для T642 - Monochrome Laser Printer

Бренды по названию

Популярные бренды