45
Understanding printer messages
Reattach bins <x> - <y>
• Turn the printer off and back on.
– If the error recurs, turn the printer off, unplug the power cord from
the wall outlet, and remove the specified bins, then reattach the bin
to the printer, r, and then restart the printer.
– If the error recurs, turn the printer off, unplug the power cord from
the wall outlet, and remove the specified bin, and call for service.
• Press
to clear the message and print without using the specified
bins.
Reattach envelope feeder
• Turn the printer off and back on.
– If the error recurs, turn the printer off, remove the envelope feeder,
then reattach the envelope feeder to the printer.
– If the error recurs, turn the printer off, remove the envelope feeder,
and call for service.
• Press
to clear the message and print without using the envelope
feeder.
Remote Management Active
DO NOT POWER OFF
The printer settings are being configured, and the printer was taken
offline to ensure it is not currently printing and processing jobs.
Wait for the message to clear.
Remove paper from bin <x>
Remove the stack of paper from the specified bin(s).
Remove paper from all bins
Remove the paper from all output bins.
Remove paper from
<linked set bin name>
The printer automatically senses media removal and resumes printing.
If removing the media does not clear the message, press
.
Remove paper from standard output
bin
Remove the paper from the standard bin.
Requested Env Not Supported
This message occurs when the finisher is attached and an envelope size
other than B5 and C5. See the finisher User Guide for instructions to print
on other envelopes.
Resetting Active Bin
Wait for the message to clear.
Resetting the Printer
Wait for the message to clear.
Restore Held Jobs
• Press
to restore all Print and Hold jobs on the hard disk.
• Select
Do not restore
to delete Print and Hold jobs.
Restoring Factory Defaults
Wait for the message to clear.
Note: When factory default settings are restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer
memory are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the “Setup” Menu.
– All settings in the “Parallel” Menu, “Serial” Menu, “Network” Menu,
“Infrared” Menu, “LocalTalk” Menu, “USB” Menu, and “Fax” Menu.
Restoring held job(s) x/y
• Wait for the message to clear.
• Select
Quit restoring
to delete unrestored Print and Hold jobs.
Note:
x
represents the number of the job being restored, and
y
represents the total number of jobs to be restored.
Serial <x>
A serial interface is the active communication link.
Some held jobs were lost
• Press
to clear the message and continue printing.
The printer frees memory by deleting the oldest held job and continues
deleting held jobs until there is enough printer memory to process the
job.
• Cancel the current job.
Message
Action
