Lexmark Optra E310, Руководство пользователя

Страница: 33 / 116

20
Chapter 1: The basics
When you have finished installing the option card(s):
1
Fit the metal shield into the slots and reattach
the screws.
2
Put the printer back to its original upright
position.
3
Re-install the print cartridge.
4
Reconnect the computer cable and latch the
metal clips.
5
Plug the power cord into the printer.
6 Turn the printer on.
As the printer powers up and the operator panel
lights begin cycling on and off, there is a pause
while the new memory is tested, then the lights
continue cycling.
7 When the Ready light comes on, press the
operator panel button briefly and print a test
page to verify that printer memory or additional
flash memory is installed.
If the
Ready
light does not come on, see
Printing
problems
.
LA.bk Page 20 Thursday, February 8, 2001 2:19 PM