Lexmark Optra E310, Руководство пользователя

Страница: 19 / 116

6
Chapter 1: The basics
12 When you finish, exit the setup program and
remove the CD from your computer.
If you are using Windows 98:
1 Make sure your computer and printer are turned
off.
2 Connect the USB cable to the port on the back of
your computer.
3 Connect the other end of the cable to the USB
port on the back of your printer.
4 Turn on your computer and your printer.
5
When the
Add New Hardware Wizard
screen
appears:
a
Select
Next
to begin searching for the new
drivers.
b
Select
Next
to use search for the correct driver.
c
Make sure the
Floppy disk drives
,
CD-ROM
drive
and
Microsoft Windows Update
check
boxes are cleared, and select the
Specify a
location
check box.
d
Insert the Drivers, MarkVision, and Utilities CD
that came with your printer and select B
rowse
.
e
Double-click the letter of your CD drive, then
double-click the Win98USB folder beneath it.
f
Highlight the language you wish to install
USB support for, then click
OK
.
g
Select
Next.
h
Select
Next
again.
i
When the hardware is loaded, click
Finish
.
The printer driver installation program
automatically launches after a few moments.
LA.bk Page 6 Thursday, February 8, 2001 2:19 PM