M
AKE
SURE
THAT
YOU
HAVE
THE
CORRECT
MANUAL
ANSWER
CODE
If you set the printer to receive faxes manually (Auto Answer Off), then you need to enter the correct code when a
fax comes in so that the printer can receive it.
1
From the home screen, navigate to:
>
Fax Setup
>
Ringing and Answering
>
Manual Answer Code
2
Copy the manual answer code that appears on the touch screen.
Note:
The default code is *9*, but for increased security, you can change it to a number that only you know.
Cannot run the fax software
The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in
the fax software.
M
AKE
SURE
THE
FAX
SOFTWARE
IS
INSTALLED
The Fax Solutions Software is optional for Windows users and is installed with the printer software only if you select
it on the “Install Additional Software” screen during installation. If you did not install the fax software, then the Fax
tab on the Printer Home takes you to our Web site where you can download the software.
M
AKE
SURE
THE
PRINTER
IS
CONNECTED
TO
A
TELEPHONE
LINE
You need to connect the printer to your telephone line through a standard wall jack (RJ-11), a DSL filter, a VoIP
adapter, or a cable modem before you can open the fax software and configure the fax settings.
M
AKE
SURE
THAT
THE
PRINTER
IS
CONNECTED
TO
THE
COMPUTER
M
AKE
SURE
THAT
THE
PRINTER
IS
NOT
IN
P
OWER
S
AVER
MODE
Troubleshooting
91