Lexmark E360D series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 166

background image

Edition: September 29, 2008

The following paragraph does not apply to any country where such provisions are inconsistent with local law

:

LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22X/002-1, 740 West New Circle Road,
Lexington, Kentucky 40550, U.S.A or e-mail at [email protected]. Lexmark may use or distribute any
of the information you supply in any way it believes appropriate without incurring any obligation to you.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these
available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or
imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that
does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in
conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the
user’s responsibility.

Lexmark, Lexmark with diamond design and MarkVision are trademarks of Lexmark International, Inc., registered in the
United States and/or other countries.

PCL® is a registered trademark of the Hewlett-Packard Company.

All other trademarks are the property of their respective owners.

© 2008 Lexmark International, Inc.

All rights reserved.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software
and documentation developed exclusively at private expense.

P/N 12G9812

4513-420, -430

«
1
2
3
4
...
»

Содержание E360D series







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для E360D series

MultiPASS L6000

Бренд: Canon Страницы: 251

MultiPASS C5500

Бренд: Canon Страницы: 24

MultiPASS L6000

Бренд: Canon Страницы: 24

Laser Class 700 Series

Бренд: Canon Страницы: 221

Бренд: quadient Страницы: 130

Бренд: Wasp Страницы: 2

Бренд: idp Страницы: 104

Бренд: Konica Minolta Страницы: 40

Бренд: Ricoh Страницы: 406

Бренд: Riso Страницы: 208

Бренд: SAGEMCOM Страницы: 146

Бренд: Oce Страницы: 32

Бренд: B-G Instruments Страницы: 2

Бренд: Anyload Страницы: 12

Бренд: Axiohm Страницы: 6

Бренд: Xerox Страницы: 2

Бренд: Epson Страницы: 190

Бренд: Epson Страницы: 204

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды