2-8
Service Manual
5022-xxx
146.01–146.08 Motor
Error
Duplex motor has failed.
POR the printer. If the error message persists, see
“146.xx—Motor (duplex) error service check” on
page 2-36
.
147.01–147.08 Motor
Error
Tray 2 motor has failed.
POR the printer. If the error message persists, see
“147.xx, 149.xx—Motor (500-sheet/550-sheet
option tray 2 motor) error service check” on
page 2-37
.
148.01–148.08 Motor
Error
MPF motor has failed.
POR the printer. If the error message persists, see
“148.xx—MPF motor error service check” on
page 2-37
.
149.01–149.08 Motor
Error
Tray 2 motor has failed.
POR the printer. If the error message persists, see
“147.xx, 149.xx—Motor (500-sheet/550-sheet
option tray 2 motor) error service check” on
page 2-37
.
2xx paper jam messages
200.01
Input sensor is made when printer
tries to print from an idle state.
Possible causes:
• Paper jam leaving page over
sensor
• Defective input sensor
• Faulty system card
• Check for anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
“Input sensor service check” on
page 2-52
.
200.11
Input sensor does not break.
Possible causes:
• Incorrect media setting
• Incorrect paper loading
• Incorrect media restraint setting
• Paper tray failure
• Paper pick mechanism
• Ensure proper media is set for the type of paper
used.
• Fan media, and stack flat in the tray or MPF.
• Properly set media restraints in the paper tray.
• Check the pick arm rolls (tires) and replace if
worn.
• Replace the paper tray.
• Replace the paper pick mechanism. See
“Paper
pick mechanism assembly removal” on
page 4-68
.
200.16
Input sensor is made when printer
powers up or covers are closed.
Possible causes:
• Paper jam leaving page over
sensor
• Defective input sensor
• Faulty system card
• Check for anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
“Input sensor service check” on
page 2-52
.
200.21
Bump aligner motor stalled.
Possible causes:
• Faulty cable/connector
• 24 V interlock switch not working
correctly
• Faulty bump align motor
• Faulty system card
• Check for anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
“145.xx and 906.05–906.08—Motor
(bump aligner) error service check” on
page 2-36
.
Service error codes and paper jam messages (continued)
Error code
Description
Action
Содержание C52 series
