Lexmark C52 series, Руководство по обслуживанию

Страница: 156 / 314

4-6
Service Manual
5022-xxx
Skew (black)
1.
Plug the electrical cord into the printer.
2.
Plug the electrical cord into the outlet.
3.
The first step in aligning the printhead is to set the skew for black.
a.
Enter Diagnostic mode (turn off the printer, press and hold and , turn on the printer, and
release the buttons when the clock graphic displays).
b.
Select REGISTRATION.
c.
Select Skew.
d.
Adjust this setting to zero, and press Select ( ).
e.
Press Back ( ).
f.
Scroll down to Quick Test, and press Select ( ). A page similar to this one prints:
Lexmark C52X
Quick Test
Printer Information
Page Count xx
PSAC xx
Installed Memory xxx MB
Processor Speed xxxMHz
Serial Number xxxxxxx
CalStat xxxx
CalSet x.xx x.xx x.xx
x.xx x.xx
Engine ID xx
FSpeed xxx
Print er Rev isi on Levels
Loader xx.xx.xxxx-x
Kernel xxx.xx.xxxx-x
Base xx.xx.xxxx-x
Network xxx.xx.xxxxx-x
Network Drvr xx.xx.xxxx-x
Engine xx.xx.xxxx-x
Font x.xxxxx-xx.x
Margin Settings
Top Margin = x
Bottom Margin = x
Left Margin = x
Right Margin = x
Skew = x
Cyan Top Margin = x
Cyan Left Margin = xx
Cyan Right Margin = x
Cyan Skew = x
Cyan Bow = x
Yellow Top Margin = x
Yellow Left Margin = x
Yellow Right Margin = x
Yellow Skew
= x
Yellow Bow = x
Magenta Top Margin = x
Magenta Left Margin = x
Magenta Right Margin = x
Magent Skew
= x
magenta Bow = x
Dup Top Margin = x
Paper Source = Tray 1
Formatted Size = xxxxxx
Top left alignment marks Top right alignment marks
Left margin
alignment
marks
Right margin
alignment
marks
Bottom margin alignment marks