16
Using printer menus
Job Menu
Quality Menu
Use this menu selection to change settings that affect print quality and save toner.
Setup Menu
Use this menu selection to configure a variety of printer features.
Menu selection
Purpose
Values
Reset Printer
Clears current print jobs
No value for this. Pressing
initiates the reset cycle. After selecting
this item, the printer will reset and return to
Ready
.
Menu selection
Purpose
Values
Print Resolution
Specifies the printed output resolution
300 dpi
600 dpi
1200 Image Q
2400 Image Q*
Toner Darkness
Lightens or darkens printed output and
conserves toner
1–10
8*
is the default setting.
Select a lower number to lighten the printed
output or save toner.
Small Font Enh.
Enhances the quality of small fonts
Off*
Fonts Only
Fonts/Images
Menu selection
Purpose
Values
Eco-Mode
The printer minimizes waste (toner,
paper, energy) while maintaining
acceptable print quality.
Off*
No changes in operation are made.
Energy
The following options are changed:
• Duplex is turned off.
• The control panel’s power indicator LED
and backlight remain off.
• Ready mode is disabled.
Energy/Paper
Same options as Energy option, except
Duplex is turned on.
Quiet Mode
The printer operates quietly by printing
output at a slower speed.
Off*
No changes in operation are made.
On
The following options are changed:
• The control panel’s power indicator LED
remains illuminated when in Ready state
and blinks when in Busy state
• All print jobs print at half speed.
• Fuser standby mode is enabled.
Note:
The engine prints at half speed in
all resolutions.
