21
Using printer menus
PostScript Menu
Use this menu selection to change printer settings that affect jobs using the PostScript printer language.
Tray Renumber
Configures your printer to work with printer drivers or programs that use different source assignments for the
paper trays
Specifies a paper source
Assign Tray <x>
Assign Man Env
Assign Man Paper
Specifies a value
Off*
Printer uses factory default paper source
assignments.
0...199
Select a numeric value to assign a
custom value to a paper source.
None
Paper source ignores the Select Paper
Feed command.
Other Tray Renumber selections
View Factory Def
Press
Menu
to display the factory default
value assigned to each paper source.
Restore Defaults
Select Yes to return all tray assignments
to factory default values.
Auto CR after LF
Specifies whether the printer
automatically performs a carriage return
after a line feed control command
Off*
Printer does not perform a carriage return
after a line feed control command.
On
Printer performs a carriage return after a
line feed control command.
Auto LF after CR
Specifies whether the printer
automatically performs a line feed after a
carriage return control command
Off*
Printer does not perform a line feed after
a carriage return control command.
On
Printer performs a line feed after a
carriage return control command.
Menu selection
Purpose
Values
Print PS Error
Prints a page defining the PostScript
emulation error when an error occurs
Off*
Discards the print job without printing an
error message
On
Prints an error message before it discards
the job
Font Priority
Establishes the font search order
Font Priority is only displayed when a
formatted flash is installed, is neither
defective nor Read/Write or Write
protected, and Job Buffer Size is not set
to 100%.
Resident*
Printer searches printer memory for the
requested font before searching flash
memory.
Flash
Printer searches the flash memory for the
requested font before searching printer
memory.
Menu selection
Purpose
Values
