Lexmark 17J0050 - C 752n Color Laser Printer Скачать руководство пользователя страница 89

Страница: 89 / 160

63 Unformatted Disk

The printer detects an unformatted
hard disk.

• Press Go to clear the message and

continue printing.

• Format the disk before performing any

disk operations. To format the disk,
select Format Disk from the Utilities
Menu.

• If the error message remains, the hard

disk may be defective and require
replacing. Install a new hard disk and
format it.

See also:

Format Disk

64 Disk Not Supported

The printer detects that an
incompatible hard disk is installed.

Turn the printer off and remove the disk.

See also:

Removing memory and option

cards

64 Unsupported Disk
Format

The printer detects an unsupported
disk format.

• Press Go to clear the message.
• Format the disk.

Note: Disk operations are not allowed
until the disk is formatted.

80 Fuser Maintenance

The counter that tracks wear on the
fuser has reached its limit.

• Press Go to continue printing.
• If print quality is unacceptable, replace

the fuser.

See also:

Replacing the fuser

81 Engine Code CRC
Failure

Microcode in the engine flash code
module has failed a system check.

• Press Go to clear the message.
• Discard the code. Retransmit the

microcode data from the host computer.

82 Waste Bottle Nearly
Full

The toner waste container is almost
full.

• Press Go to clear the message and

continue printing.

• Replace the toner waste container.

See also:

82 Waste Toner Bottle Full

;

Replacing the toner waste container

82 Waste Toner Bottle
Full

The toner waste container is full.

Replace the toner waste container and
press Go to clear the message.

See also:

Replacing the toner waste

container

82 Waste Toner Bottle
Missing

The toner waste container is missing.

Replace the toner waste container and
press Go to clear the message.

See also:

Replacing the toner waste

container

83 ITU Maintenance

The counter that tracks wear on the
image transfer unit has reached its
limit.

• Press Go to continue printing.
• If print quality is unacceptable, replace

the image transfer unit.

See also:

Replacing the image transfer

unit and transfer roller

84 Oiler Nearly
Exhausted

The web oiler is nearing the end of its
life.

• Press Go to clear the message and

continue printing.

• Replace the web oiler.

See also:

84 Replace Oiler

The web oiler has reached its end of
life or is missing from the printer.

Replace the web oiler.

See also:

84 Oiler Nearly Exhausted

Message

What this message means

What you can do

Содержание 17J0050 - C 752n Color Laser Printer

































































































































































Результаты поиска

Содержание 17J0050 - C 752n Color Laser Printer

Отзывы:

Похожие инструкции для 17J0050 - C 752n Color Laser Printer

Бренды по названию

Популярные бренды

Lexmark 17J0050 - C 752n Color Laser Printer, Справочник пользователя

Результаты поиска

Содержание 17J0050 - C 752n Color Laser Printer

Отзывы:

Похожие инструкции для 17J0050 - C 752n Color Laser Printer

Бренды по названию

Популярные бренды