Lexmark 17J0050 - C 752n Color Laser Printer Скачать руководство пользователя страница 82

Страница: 82 / 160

Programming Error
P<x>

An error occurred while the printer was
programming code into memory.

Correct the problem specified on the
second line of the display:

• P1050—A network file was used to

program a non-network printer, or a non-
network file was used to program a
network printer.

• P109—An update file was used to

program the printer, but the information
did not fit within the space allocated in
the Master Boot Record.

• P112—An upddle.fls file was used to

update the DLE code on a printer with a
firmware card installed, but the DLE was
not found on the firmware card.

• P200—No firmware card is installed.

Queuing and Deleting
Jobs

The printer is deleting one or more
held jobs and sending one or more
jobs to print.

Wait for the message to clear.

See also:

Printing and deleting held jobs

Queuing Jobs

The printer is sending one or more
held jobs to print.

Wait for the message to clear.

See also:

Holding a job in the printer

Ready

The printer is ready to receive and
process print jobs.

Send a job to print.

Ready Hex

The printer is in Hex Trace mode and
is ready to receive and process print
jobs.

• Send a job to print. All data sent to the

printer is printed in hexadecimal and
character representation. Control strings
are printed, not executed.

• Turn the printer off and then on to exit

Hex Trace mode and return to Ready
status.

Reattach <device>

The specified device is either not fully
connected to the printer or is
experiencing a hardware failure.

• Reestablish communication by removing

the specified device and reattaching it to
the printer.

• Press Go to clear the message and

continue printing without using the
device.

• In the case of a hardware failure, turn

the printer off and back on. If the error
recurs, turn the printer off, remove the
specified device, and call for service.

See also:

Calling for service

Remove Paper
<specified bin>

The specified output bin, or bins, is full. Remove the stack of paper from the

specified bin(s) to clear the message.

Resetting Active Bin

The printer is resetting to the active bin
in a linked set of bins.

Wait for the message to clear.

Resetting Fuser Cnt
Value

The printer is resetting the counter that
tracks wear on the fuser.

Wait for the message to clear.

Resetting the Printer

The printer is resetting to the current
default settings. Any active print jobs
are canceled.

Wait for the message to clear.

See also:

Changing menu settings

Message

What this message means

What you can do

Содержание 17J0050 - C 752n Color Laser Printer

































































































































































Результаты поиска

Содержание 17J0050 - C 752n Color Laser Printer

Отзывы:

Похожие инструкции для 17J0050 - C 752n Color Laser Printer

Бренды по названию

Популярные бренды

Lexmark 17J0050 - C 752n Color Laser Printer, Справочник пользователя

Результаты поиска

Содержание 17J0050 - C 752n Color Laser Printer

Отзывы:

Похожие инструкции для 17J0050 - C 752n Color Laser Printer

Бренды по названию

Популярные бренды