157
58 Too Many Flash Options 88
59 Incompatible <device> 88
61 Defective Disk 88
62 Disk Full 88
63 Unformatted Disk 89
64 Disk Not Supported 89
64 Unsupported Disk Format
89
80 Fuser Maintenance 89
81 Engine Code CRC Failure
89
82 Waste Bottle Nearly Full 89
82 Waste Toner Bottle Full 89
82 Waste Toner Bottle Missing
89
83 ITU Maintenance 89
84 Oiler Nearly Exhausted 89
84 Replace Oiler 89
85 ITU Maintenance 90
86 ITU Maintenance 90
87 Fuser Missing 90
88 <color> Toner Low 90
89 ITU Maintenance 90
900–999 Service <message>
90
Activating Menu Changes 76
Bin <x> Full 76
Busy 76
Canceling Fax 77
Canceling Job 77
Change <x> 77
Check <device> Connection 77
Clearing Job Accounting Stat
77
Close Door 77
Close Finisher Door 77
Close Tray X Door 77
Copying 77
Defragmenting 77
Delete All Jobs 77
Deleting Jobs 77
Disabling Menus 77
Disk Corrupted. Reformat? 77
Disk Recovery x/5 yyy% 78
Empty Hole Punch Box 78
Enabling Menus 78
Engine Warming 78
Enter PIN
=___ 78
Fax <x> 78
Flushing Buffer 78
Formatting Disk 78
Formatting Flash 78
Held Jobs may be lost 78
Held Jobs May Not Be Restored
79
Hole Punch Waste Full 79
Insert Staple Cartridge 79
Insert Tray <x> 79
Install <device> or Cancel Job
79
Invalid Engine Code 79
Invalid Network <x> Code 79
Invalid Standard Network Code
79
ITU/Fuser Maint 79
Load <x> Plain Letter 79
Load Manual 79
Load Staples 80
Load Tray <x> 80
Menus Disabled 80
Network <x> 80
Network <x>,<y> 80
Network Card Busy 80
No DRAM Installed 80
No Jobs Found. Retry? 80
Not Ready 80
Ovrflow Bin Full 80
Parallel <x> 80
Performing Self Test 80
Power Saver 81
Print Jobs on Disk 81
Printer Calibrating 81
Printing Alignment Page 81
Printing Directory List 81
Printing Font List 81
Printing Job Accounting Stat 81
Printing Menu Settings 81
Prog Engine Code 81
Prog System Code 81
Program Flash 81
Programming Disk 81
Programming Error P<x> 82
Queuing and Deleting Jobs 82
Queuing Jobs 82
Ready 82
Ready Hex 82
Reattach <device> 82
Remove Paper <specified bin>
82
Resetting Active Bin 82
Resetting Fuser Cnt Value 82
Resetting the Printer 82
Restore Held Jobs. Go/Stop?
83
Restoring Factory Defaults 83
Restoring Held Job xxx/yyy 83
Restoring Held Jobs 83
Serial <x> 83
Setup Required 83
Staples Low 83
Std Bin Full 83
Supplies 83
Tray <x> Empty 83
Tray <x> Low 83
Tray <x> Missing 84
USB <x> 84
Waiting 84
Multipage Border (Finishing Menu)
47
Multipage Order (Finishing Menu)
47
multipage print
border settings 47
configuring 47
order settings 47
view settings 48
Multipage Print (Finishing Menu)
47
Multipage View (Finishing Menu)
48
multipurpose feeder, configuring
58
N
Network <x> Setup (Network
Menu) 51
Network Buffer (Network Menu)
51
Network Menu 51
Job Buffering 51
MAC Binary PS 51
Network <x> Setup 51
Network Buffer 51
NPA Mode 52
PCL SmartSwitch 52
PS SmartSwitch 52
Std Net Setup 52
network port
configuring
buffer size 51
NPA mode 52
PCL SmartSwitch 52
PS SmartSwitch 52
NPA Mode (Network Menu) 52
NPA Mode (Parallel Menu) 53
NPA Mode (Serial Menu) 66
NPA Mode (USB Menu) 73
NPA mode, setting
network port 52
parallel port 53
serial port 66
USB port 73
numbers, operator panel 17
numerical values, selecting 16
O
Offset Pages (Finishing Menu) 48
Oiler (Supplies Menu) 72
operator panel 16
buttons 16
numbers 17
options
verifying installation with menu
settings page 135
