Lexmark 12N1515 - C 912fn Color LED Printer Скачать руководство пользователя страница 112

Страница: 112 / 207

Understanding printer messages

Message

What this message means

What you can do

54 Network <x> Software
Error

The printer cannot establish
communications with an installed
network port.

• Press Go to clear the message

and continue printing. The job may
not print correctly.

• Program new firmware for the

network interface by way of the
parallel port.

• Press Menu to open the Job Menu

and reset the printer.

54 Std Network Software
Error

54 Std Par ENA
Connection Lost

The printer has lost the
connection to an external print
server (also called an external
network adapter or ENA).

• Make sure the cable connecting

the ENA and the printer is
securely attached. Turn the printer
off and then on to reset the printer.

• Press Go to clear the message.

The printer erases any reference
to the ENA and then resets.

54 Par <x> ENA
Connection Lost

56 Serial Port <x>
Disabled

Data has been sent to the printer
through a serial port, but the
serial port is disabled.

• Press Go to clear the message.

The printer discards any data
received through the serial port.

• Make sure the Serial Buffer menu

item in the

Serial Menu

is not

set to Disabled.

56 Standard Serial
Disabled

56 Parallel Port <x>
Disabled

Data has been sent to the printer
through a parallel port, but the
parallel port is disabled.

• Press Go to clear the message.

The printer discards any data
received through the parallel port.

• Make sure the Parallel Buffer

menu item in the

Parallel Menu

is not set to Disabled.

56 Std Parallel Port
Disabled

56 USB Port <x> Disabled

Data has been sent to the printer
through a USB port, but the USB
port is disabled.

• Press Go to clear the message.

The printer discards any data
received through the USB port.

• Make sure the USB Buffer menu

item in the

USB Menu

is not set to

Disabled.

56 Standard USB Port
Disabled

57 Configuration
Change

The printer cannot restore jobs
from the disk because the printer
trays or drawers have been
changed.

Press Go to clear the message.
Some of the Print and Hold jobs
stored on the disk will not be
restored.

58 Input Config Error

Too many drawers with matching
trays are installed on the printer.

Turn off and unplug the printer.
Remove the additional drawers or
reconfigure the offending option.
Plug in the printer and turn it on.

Note: To prevent an electrical
overload, plug your printer into a
well-grounded outlet on a non-
ground fault interrupter (GFI) circuit.

Содержание 12N1515 - C 912fn Color LED Printer
















































































































































































































Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды

Lexmark 12N1515 - C 912fn Color LED Printer, Руководство пользователя

Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды