Lexmark 12N1515 - C 912fn Color LED Printer Скачать руководство пользователя страница 100

Страница: 100 / 207

Understanding printer messages

Message

What this message means

What you can do

Check <device>
Connection

The specified device is either not
fully connected to the printer or is
experiencing a hardware failure.

• Reestablish communication by

removing the specified device and
reattaching it to the printer.

• Press Go to clear the message

and continue printing.

• If a hardware failure, turn the

printer off and back on. If the error
recurs, turn the printer off, remove
the specified device, and call for
service.

Clearing Job
Accounting Stat

The printer is deleting all job
statistics stored on the hard disk.

Wait for the message to clear.

Close Front Door

The printer front door is open.

Close the printer front door to clear
the message.

Close Side Door

The printer side door is open.

Close the printer side door to clear
the message.

Close Top Door

The printer top door is open.

Close the printer top door to clear
the message.

Close Tray <x>
Top Cover

The high capacity feeder door is
open.

Note: The high capacity feeder
can only be installed as Tray 3 or
Tray 5.

Close the top cover to clear the
message.

Copying

The printer is processing a copy
job originating from the scanner.

Wait for the message to clear.

Defragmenting

The printer is defragmenting the
flash memory to reclaim storage
space occupied by deleted
resources.

Wait for the message to clear.

Warning: Do not turn the printer off
while this message is displayed.

Delete All Jobs

The printer is requesting
confirmation to delete all held
jobs.

• Press Go to continue. The printer

deletes all held jobs.

• Press Stop to cancel the

operation

Deleting Jobs

The printer is deleting one or
more held jobs.

Wait for the message to clear.

Did You Replace
Belt?

You have turned on the printer
while the transfer belt is in the
warning state and needs to be
replaced.

• Press Select to reset the transfer

belt maintenance counter.

• Press Stop to continue. The

message continues to appear
each time you turn the printer on
while the transfer belt is in the
warning state.

Understanding printer messages

Содержание 12N1515 - C 912fn Color LED Printer
















































































































































































































Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды

Lexmark 12N1515 - C 912fn Color LED Printer, Руководство пользователя

Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды