Lexmark 12N1515 - C 912fn Color LED Printer Скачать руководство пользователя страница 107

Страница: 107 / 207

Understanding printer messages

Message

What this message means

What you can do

Restore Held Jobs. Go/
Stop?

Someone reset the printer or
turned it on, and the printer
detects Print and Hold jobs
stored on the hard disk.

• Press Go. All Print and Hold jobs

on the hard disk are restored to
printer memory.

• Press Return or Stop. No Print

and Hold jobs are restored to
printer memory. The printer
returns to the Ready state.

See also:

Using the Print and Hold

function

Restoring Factory
Defaults

The printer is restoring the
factory default printer settings.
When factory default settings are
restored:

• All downloaded resources

(fonts, macros, symbol sets) in
the printer memory are
deleted.

• All menu settings return to the

factory default setting except:

– The Display Language setting

in the Setup Menu.

– All settings in the Parallel

Menu, Serial Menu, Network
Menu, USB Menu, and Fax
Menu.

Wait for the message to clear.

Restoring Held Job xxx/
yyy

The printer is restoring held jobs
from the hard disk.

Note:

xxx

represents the

number of the job being restored.

yyy

represents the total number

of jobs to be restored.

• Wait for the message to clear.
• Select the Abort Restore menu

item in the Job Menu.

See also:

Using the Print and Hold

function

Restoring Held Jobs

The printer is restoring held jobs
from the hard disk.

Wait for the message to clear.

See also:

Using the Print and Hold

function

Serial <x>

A serial interface is the active
communication link.

Wait for the message to clear.

Std Bin Full

The standard bin is full.

Remove the stack of paper in the bin
to clear the message.

Supplies

At least one of the printer
supplies requires attention. For
example, you may have a toner
cartridge that is low on toner.

Press Menu to open the Supplies
Menu and identify which supply item
needs replacing. Replace the
appropriate printer supplies.

Tray <x> Empty

The specified tray is out of paper. Load paper in the tray to clear the

message.

See also:

Loading a paper tray

Tray <x> Low

The specified tray is low on
paper.

Add paper to the tray to clear the
message.

See also:

Loading a paper tray

Understanding printer messages

102

Содержание 12N1515 - C 912fn Color LED Printer
















































































































































































































Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды

Lexmark 12N1515 - C 912fn Color LED Printer, Руководство пользователя

Результаты поиска

Содержание 12N1515 - C 912fn Color LED Printer

Отзывы:

Похожие инструкции для 12N1515 - C 912fn Color LED Printer

Бренды по названию

Популярные бренды