Leviton MLC16 Скачать руководство пользователя страница 41

Страница: 41 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 35 of 62

Main LCD menu reads

!Fixture

Overlap

Error!

•

Fixture

button assignments have been made

that have resulted in traits from one device to

be assigned to the same output channels as

traits from another device. Devices almost

always control more than one output channel.

Therefore, starting channel assignments will not

be consecutive channel numbers. See

“Assigning Fixtures” on page 8.

MLC 16 Main Screen reads

!Group

Matching Found

No Matching Traits!

•

Group

button has been assigned

Fixture

buttons that have devices assigned that have no

common trait labels. For it to be useful, a Group

should be assigned so that there is at least one

common trait label among all

Fixture

buttons

assigned to it.

MLC 16 Main Screen reads

!Group Matching

Contains No Traits To

Display!

•

Group

button has been assigned

Fixture

buttons that have assigned devices that only

have either pan, tilt, or both pan and tilt, in

common. The joystick or mouse will control

those channels.

Scene Select

button LED

lights momentarily when

button is pressed but then

goes out.

•

The scene has not been programmed or has

been programmed in Select mode with no traits

captured. Re-record the Scene.

Pattern Select

button LED

will not turn on.

•

The pattern has not been programmed.

•

The LED may be out. Try the Panel Test to

verify.

Pattern runs for awhile, then

turns off.

•

The pattern has a step recorded with no trait

included. This can result during editing of a

pattern if a step is inserted and then not

recorded.

Содержание MLC16







































































Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды

Leviton MLC16, Руководство пользователя

Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды