Leviton MLC16 Скачать руководство пользователя страница 67

Страница: 67 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 61 of 62

Warranty

Limited Warranty

Leviton Lighting Control Division — NSI Products warrants new electronics

products to be free from defective materials and workmanship for a period of two

(2) year from the date of purchase to the original owner when purchased from an

authorized NSI dealer.
The purchaser is responsible for completing and mailing to NSI, within 15 days of

purchase, the warranty registration card enclosed with each product. NSI

products that have been subject to accident, alteration, abuse, or defacing of the

serial number are not covered by this warranty. The normal wear and tear of

items such as knobs, jacks, and switches are not covered under this warranty.
If your NSI product requires service during the warranty period, NSI will repair or

replace, at its option, defective materials provided you have identified yourself as

the original owner of the product to NSI or any authorized NSI dealer.

Transportation charges to and from an authorized dealer or the NSI factory for

repair shall be the responsibility of the owner. All products returned to NSI must

have factory authorization for return prior to shipping.
Leviton is not liable for any incidental or consequential damages resulting from

defect or failure other than repairs of the NSI product subject to the terms of this

warranty. This warranty gives you specific legal rights, and you may have other

rights which vary from state to state. This warranty is expressly in lieu of all other

agreements and warranties expressed or implied except as may be otherwise

required by law.

Содержание MLC16







































































Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды

Leviton MLC16, Руководство пользователя

Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды