Leviton MLC16 Скачать руководство пользователя страница 18

Страница: 18 / 70

User Guide

Page 12 of 62

Leviton MLC 16D Motorized Lighting Controller

•

X-axis and Y-axis.

Assigns a trait to the X or Y-axis of the joystick. More than

one trait of a fixture can be assigned to either axis and a single trait can be

assigned to both axes. X is usually horizontal or pan; Y is usually vertical or tilt.

•

B/O (Blackout).

Sets the trait to the assigned Blackout value whenever the

Blackout

button is pressed.

•

BoValue (Blackout Value).

Assigns the value a trait is at when the

Blackout

button is pressed.

•

Master.

Assigns a trait to the Grand Master control.

•

Default.

Assigns a default value to a trait; pressing the

Default

button causes

the default value to be applied whenever a fixture is active.

•

Max and Min.

Assigns maximum and minimum values to a continuous trait.

This is useful when a device does not use the full range of DMX512 values, or

when a continuous trait is part of a union.

Adjusting Indexed Trait Parameters

Indexed traits are made of index values, which can be changed at any time. Each

index can be assigned a specific label just as each trait can be assigned a specific

label.
You can modify the following parameters for indexed traits.

•

Channel.

Determines which channel of the DMX512 stream should be used for

this trait. This is a relative number that is added on to the base address of the

fixture once it is assigned to a

Fixture Select

button.

•

X-axis and Y-axis.

Assigns a trait to the X or Y-axis of the joystick. More than

one trait of a fixture can be assigned to either axis and a single trait can be

assigned to both axes. X is usually horizontal or pan; Y is usually vertical or tilt.

•

B/O (Blackout).

Sets the trait to the assigned Blackout value whenever the

Blackout

button is pressed.

•

BoValue (Blackout Value).

Assigns the value a trait is at when the

Blackout

button is pressed.

•

Default.

Assigns a default value to a trait; pressing the

Default

button causes

the default value to be applied whenever a fixture is active.

•

Indexes (Number of Indexes).

Specifies the number of indexes used by the

trait. There are a maximum of 255 indexed values that can be assigned.

•

IL1-ILX (Index Label 1-X).

Assigns a label to the specified index value. Index

labels are stored separately from the Table of Trait Labels, providing up to 896

labels to choose from or create.

•

IV1-IVX (Index Value 1-X).

Assigns a value to the specified index value.

Adjusting Union Trait Parameters

Union traits act as a header for continuous and indexed traits grouped together

on the same channel. The end of the group is marked by an end union trait. This

trait is automatically inserted when you select and insert a union trait.
You can modify the following parameters for union traits.

•

Channel.

Determines which channel of the DMX512 stream should be used for

this trait. This is a relative number that is added on to the base address of the

fixture once it is assigned to a

Fixture Select

button.

•

B/O (Blackout).

Sets the trait to the assigned Blackout value whenever the

Blackout

button is pressed.

Содержание MLC16







































































Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды

Leviton MLC16, Руководство пользователя

Результаты поиска

Содержание MLC16

Отзывы:

Похожие инструкции для MLC16

Бренды по названию

Популярные бренды