Page 5
Ethernet Ports and Reset Button
Ethernet Ports
WAN ports: Using Port 1 to Port 4 for connecting to Modem(s).
DMZ ports: Using Port 15 and Port 16
LAN ports: The remaining ports which are connected to PCs or a Hub.
Note:
Any port will automatically operate as an “Uplink” port if required. You can use a
normal LAN cable to connect to a normal port on another hub.
Reset Button
When pressed and released, the Multi-WAN VPN Router will reboot (restart)
within 1 second. It will reset to default when pushed and held for more than 3
seconds.
Some Status and Error conditions are indicated by the combinations of
LEDs, as shown below:
LED Action
Condition
Status
– System & Packets flash alternatively.
Firmware Download in progress.
Status
– System & Packets flash concurrently.
MAC address not assigned.
Status
– System (Solid Off) & Packets (Solid On)
SDRAM error
Status
– System (Solid On) & Packets (Solid On)
Timer/Interrupt error
