Page 36
Special Application
If you use Internet applications which have non-standard connections or port numbers, you may find
that they do not function correctly because they are blocked by the firewall in the Multi-WAN VPN
Router. In this case, you can define the application as a "Special Application" in order to make it work.
Note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC)
viewpoint
Figure 4-6: Special Application
Settings
– Special Application
Special Application
Configuration
Enable
–
Use this to Enable or Disable the Special Application as
required
Name
– Enter a descriptive name to identify the Special Application.
Outgoing Protocol
–Select the protocol used by the application when
sending data to the remote server or PC.
Outgoing Port Range
– Enter the beginning and end of the range of
port numbers used by the application server for data you send. If the
application uses a single port number, enter it in both fields.
Incoming Protocol
– Select the protocol used by the application when
receiving data from the remote server or PC.
Incoming Port Range
–Enter the beginning and end of the range of
port numbers used by the application server for data you receive. If the
application uses a single port number, enter it in both fields.