Page 10
9. Select
LAN & DHCP
from the menu. You will see a screen like in the example below.
Figure 2-3: LAN & DHCP Setup
10. If your LAN already has a DHCP Server and you wish to continue using it, the following
configuration is required:
The DHCP Server function in the Multi-WAN VPN Router must be
disabled
. You will find this
setting in the
LAN & DHCP
screen.
Your DHCP Server must be configured to provide the Multi-WAN VPN Router's LAN IP
Address as the "Default Gateway".
Your DHCP Server must provide correct DNS addresses to any connected PCs.
11. Ensure these settings are suitable for your LAN:
See the following table for details of each setting. For most situations, the default settings will
be suitable.