D
Installation and Commissioning
D.1
Preparation
Observe the following points before installing the data transmission unit:
·
One device of each type (DDLS 170.1 and DDLS 170.2) is required per data
transmission path.
·
The data transmission path can be either horizontal or vertical.
·
Ensure interference-free data transmission through
- unimpeded optical connection between transmitter and receiver
- precise alignment
- clean lenses
·
Parallel operation of several data transmission paths:
When arranged with shifted frequencies, two parallel data paths can be operated
with a separation 0.3 m.
The parallel distance to a third transmission path can be calculated as follows:
parallel distance = 0.025 x range (however, at least 2.5 m)
Fig. Appendix 10: Multiple data transmission paths
positioned one behind the other
parallel
no influence
no influence
min. 0,3 m
DDLS 170.2
DDLS 170.1
DDLS 170.2
DDLS 170.1
DDLS 170.2
DDLS 170.1
DDLS 170.2
DDLS 170.1
These data are only valid for the previous data transmission systems DDLS 170.1
and DDLS 170.2!
Leuze electronic
DDLS 170
55