Device description
Leuze electronic
BCL 608i
16
NET LED
3.6
Operational controls
Navigating within the menus
Use the navigation buttons
to move through the menu. Activate the desired selection with the enter
button .
Press the escape button to move up one menu level.
When one of the buttons is actuated, the display illumination is activated for 10 min.
Setting values
Set the desired value with the navigation buttons
and the enter button .
An accidental incorrect entry can be corrected by selecting the left arrow button and then pressing the
enter button.
Then use the navigation buttons to select save and save the set value by pressing the enter button.
Selecting options
Set the desired option with the navigation buttons
and the enter button .
3.7
External parameter memory
The optionally available external parameter memory – based on a USB memory stick (compatible with
version 1.1) – is housed in an external hood with integrated connectors which cover the USB service inter
-
face when installed (IP 65).
The external parameter memory makes it easy and reduces the time needed to replace a device on site
by providing a copy of the current parameter set of the device. This eliminates the need to configure the
exchanged device manually.
The delivery contents of the external parameter memory include the hood with integrated connectors with
unscrewable cover and the USB memory stick.
Off
No supply voltage
• No communication possible
• Ethernet protocols not released
Flashes green
Initialization
• of the device, establishing communication
Green, continu
-
ous light
Operation OK
• Network mode ok
• Connection and communication to the host established
Flashes red
Communication error
• Temporary connection error
• If DHCP is active, no address could be obtained
Red, continuous
light
Network error
• Network error
• No connection established
• No communication possible
ESC
To mount, the cover of the service interface must be unscrewed. Then screw the tube body onto
the USB connection on the device and plug the USB memory stick into the connection and close
the connector hood with the cover to ensure degree of protection IP 65.
