background image

Device description

Leuze electronic

BCL 608i

15

3.5.2 Status display and operation

Indicators in the display

Table 3.1:

Status displays of the switching inputs/outputs

Table 3.2:

Status display of the USB interface

Read result
The read bar code information is displayed.

3.5.3 LED indicators

 PWR LED

IO1

Switching input or switching output 1 active (function dependent on set configuration).

Default: Switching input with the “Reading gate activation” function

IO2

Switching input or switching output 2 active (function dependent on set configuration).

Default: Input with the “Teach-in” function

IO3

Switching input or switching output 3 active (function dependent on set configuration).

Default: Switching input with the “Reading gate activation” function

IO4

Switching input or switching output 4 active (function dependent on set configuration).

Default: Switching output with the “No read” function

ATT

Warning (Attention)

ERR

Internal device error (Error) -> The device must be sent in for inspection

USB

The device is connected to a PC via the USB interface.

MS

An external parameter memory is properly connected to the USB interface of the device.

Off

Device OFF

• No supply voltage

Flashes green

Device ok, initialization phase

• No bar code reading possible

• Voltage connected

• Self test running

• Initialization running

Green, continu

-

ous light

Device OK

• Bar code reading possible

• Self test successfully finished

• Device monitoring active

Orange, continu

-

ous light

Service mode

• Bar code reading possible

• Configuration via the USB service interface

• Configuration via the display

• No data on the host interface

Flashes red

Device ok, warning set

• Bar code reading possible

• Temporary operating fault

Red, continuous 

light

Device error / parameter enable

• No bar code reading possible

Содержание BCL 608i





























































































Отзывы: