PROFIBUS interface
Leuze electronic
AMS 304
i
72
TNT
35/7-2
4
V
Hex code of the "Error handling procedures" parameter (position and velocity)
The value listed in this table shows the hex coding of the default settings:
Input data
no
Output data
no
Error delay
(velocity)
Specifies in the event of an error
whether the velocity immediately
outputs the value of the "velocity in the
case of error" parameter or outputs the
last valid velocity for the duration of the
configured "error delay time".
3.3
Bit
0: OFF
1: ON
1
–
–
Error delay
time
(velocity)
Errors which occur are suppressed for
the configured time. If no velocity posi-
tion value can be ascertained during
the configured time, the last valid
velocity value is output. If the error
persists after the time elapses, the
value stored in the "velocity in the case
of error" parameter is output.
4…5
unsign
16 bit
200 … 1000
200
ms
–
Parameter length: 6 bytes
g
h
Module address
P
o
sition v
a
lue in the case of error
Suppr
e
ss
posit
ion st
atus
Error delay (position)
P
o
sit
ion suppr
e
ss
ion t
ime
V
e
locity output in the case of error
Suppr
e
ss
velocity
stat
us
Er
ror d
e
lay (ve
loc
ity)
V
e
locit
y suppression time
09
C0
00 64
C0
00 C8
