Let's Go Aero BLACK BOX Скачать руководство пользователя страница 21

Страница: 21 / 21

PAGE 21 OF 21

ONE YEAR LIMITED WARRANTY

We warrant this Let’s Go Aero brand product during the time the original retail purchaser owns

it. This warranty terminates if a purchaser transfers the product to any other person.

Let’s Go Aero warrants this product to be free from defect in material and workmanship for

one year (retain your sales receipt for your records). Any product or part thereof found to be

defective within that period will be replaced without charge provided that: (1) the product was

not misused; (2) no alterations or modifications were made; (3) its failure was not a result of

normal wear expected in the use of the product; (4) the product or part is delivered, freight

prepaid, to Let’s Go Aero.

Manufacturers only obligation shall be to replace such products or parts proved to be defective.

A Return Merchandise Authorization is required prior to return. Please contact Let’s Go Aero

toll-free, at 877-464-2376 or 719-630-3800, or via email to [email protected] to get an

RMA number.

No warranty is given for LGA products purchased outside of the United States and Canada.

To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com

Technical Support

For assistance with this product, please contact us:

Let’s Go Aero, Inc.

4474 Barnes Road

USA

Phone: 877-464-2376 or 719-630-3800

Email: [email protected]

To learn more about our products and stay informed about useful options for transporting all kinds of

gear with your carrier, be sure to visit our website: www.LetsGoAero.com

Patent and trademark protected.

Patent Numbers 6,609,725; 6,945,550; 8,079,613; D717718; 8,858,141; Patents Pending

Содержание BLACK BOX






















Результаты поиска

Содержание BLACK BOX

Отзывы:

Бренды по названию

Популярные бренды

Let's Go Aero BLACK BOX, Руководство по эксплуатации продукта

Результаты поиска

Содержание BLACK BOX

Отзывы:

Бренды по названию

Популярные бренды