Page 9 of 13
STEP 5
STEP 6
STEP 7
Using the Legs [
A
] that face away from the vehicle, remove one bolt and
associated hardware from each Leg [Figure 14].
NOTE:
Remove the bolt that is located
furthest away
from the vehicle
on the
interior of the carrier
as shown [Figure 13].
Re-attach the hardware removed from Step 6, installing
with it the Right & Left [
D & E
] assembly bar as shown
[Figure 16 & 17].
NOTE:
For this carriers application, the Right & Left
Support [
D & E
] assembly must be mounted using the
holes located closest to the end [Figure 15].
[Figure 15]
[Figure 17]
[Figure 14]
Carrier
Installation
DO NOT
USE
D & E
SHOWN WITHOUT FLOOR
PANELS FOR CLARITY
SHOWN WITHOUT CARRIER
FLOOR PANELS FOR CLARITY
A
A
D
E
Place the Right Support Bar [
D
] on top of the Left
Support Bar [
E
] where the slots meet at the end of each
bar [Figure 12].
Secure the bars together with the supplied 1/4” x 20
x 3/4in Bolt [
P
], one (1) 1/4” Washer [
N
], and one (1)
Nylon Nut [
M
].
[Figure 12]
E
P
D
N
M
[Figure 13]
A
[Figure 16]
C
TOOLS REQUIRED: 7/16IN SOCKET & WRENCH
TOOLS REQUIRED: 9/16IN SOCKET & WRENCH
TOOLS REQUIRED: 9/16IN SOCKET & WRENCH