Page 4 of 13
STEP 5
Following the same procedure as STEPS 3 &
4 on the opposite end of the carrier (Driver’s
side), use two (2) of the existing bolts and
hardware from the floor of the carrier to
install a second Leg [
A
] as shown. [Figure 9].
NOTE:
This Leg [
A
] MUST be placed so
that the wheel faces away from the vehicle.
[Figure 10]
Passenger
Driv
er
Passenger
Driv
er
[Figure 10]
[Figure 9]
A
B
A
B
GENERIC CARRIER WITH SMOOTH
FLOOR SHOWN FOR CLARITY
Existing
Hardware
TOOLS REQUIRED: 7/16IN SOCKET & WRENCH
Existing
Hardware
Existing
Hardware
STEP 6
Using the next two (2) existing bolts and
hardware positioned on the same side of the
carrier as Step 5 (Driver’s Side), install the
third Leg [
A
] as shown. [Figure 11].
NOTE:
This Leg [
A
] is positioned
opposite
of
the Legs from Steps 4 & 5,
facing towards
the vehicle.
[Figure 12].
Passenger
Driv
er
Passenger
Driv
er
[Figure 12]
[Figure 11]
A
B
A
B
Existing
Hardware
TOOLS REQUIRED: 7/16IN SOCKET & WRENCH
Existing
Hardware
Existing
Hardware
