Lenze 8400 protec, Руководство по оборудованию

Страница: 162 / 198

Diagnostics
Display of operating data, diagnostics
Status display of the safety system via LEDs at the controller
10
162
EDS84DPS424 EN 5.0
Pos. Colour State Description
DI7 yellow
on DI7 = HIGH
off DI7 = LOW
DI8 yellow
on DI8 = HIGH
off DI8 = LOW
DI9/DO3 yellow
on DI9/DO3 = HIGH
off DI9/DO3 = LOW
DI10/DO4 yellow
on DI10/DO4 = HIGH
off DI10/DO4 = LOW
DI11 yellow
on DI11 = HIGH
off DI11 = LOW
DI12 yellow
on DI12 = HIGH
off DI12 = LOW
DI13 yellow
on DI13 = HIGH
off DI13 = LOW
DI14 yellow
on DI14 = HIGH
off DI14 = LOW
10.1.3 Status display of the safety system via LEDs at the controller
Status display: drive−based safety
Pos. Colour State Description
S−State green
on
Communication between standard device and safety system
is running
blinking Drive−based safety is in service status
off
Communication between standard device and safety system
is not possible
S−Error red
on Fault, trouble or warning
blinking Drive−based safety is not accepted by the standard device
off Error−free operation
S−Acknw yellow on A parameter set acceptance must be acknowledged
S−Enable yellow
on Controller is enabled
blinking Safety function is active (non−safe display)
The status of safety option 10 is solely shown via the "S−Enable" display. All other displays have no function.
Danger!
Danger to life due to wrong interpretation of the status display
A wrong interpretation of the status display of the drive−based safety may
result in dangerous operating statuses.
Possible consequences:
ƒ
Death or severe injuries
Protective measures:
ƒ
The status display of the drive−based safety must not be used for
safety−related purposes. The displays shown are unsafe.