Lenze 8400 protec, Руководство по оборудованию

Страница: 166 / 198

Diagnostics
Display of operating data, diagnostics
Drive diagnostics via the integrated display
10
166
EDS84DPS424 EN 5.0
Message display
If warnings or errors are pending, their displays are blinking.
Overview of the error messages of the operating system
The table below lists all error messages of the controller operating system in alphabetically
ascending order of the abbreviated designation with the preset error response as well as
the parameter for setting the error response, if available.
Error
Group
ID Number Abbr. Text Reaction CAN code Setting
106
1 0x0601 PL01 PLC internal No reaction − C00596/1
2 0x0602 PL02 PLC watchdog No reaction − C00596/2
3 0x0603 PL03 PLC parameter error No Reaction − C00596/3
4 0x0604 PL04 PLC retain data error No reaction − C00596/4
21 0x0615 PL21 PLC program generic error 1 No reaction − C00596/9
22 0x0616 PL22 PLC program generic error 2 No reaction − C00596/10
23 0x0617 PL23 PLC program generic error 3 No reaction − C00596/11
24 0x0618 PL24 PLC program generic error 4 No reaction − C00596/12
25 0x0619 PL25 PLC program generic error 5 No reaction − C00596/13
26 0x061a PL26 PLC program generic error 6 No reaction − C00596/14
27 0x061b PL27 PLC program generic error 7 No reaction − C00596/15
28 0x061c PL28 PLC program generic error 8 No reaction − C00596/16
111
2 0x0b02 Su02 One mains phase is missing Warning 0x3000 C00565
3 0x0b03 Su03 Too frequent mains switching Fault 0x3000 −
4 0x0b04 Su04 CU supplied insufficiently Fault 0x3000 −
5 0x0b05 Su05 IO supply overload Warning 0x3000 C00598/4
119
50 0x1332 OC5 Ixt overload Fault 0x2000 −
1 0x1301 OH1 Heatsink overtemperature Fault 0x4000 −
15 0x130f OH3 Motor temperature (X21) triggered Fault 0x4000 C00585
0 0x1300 OH4 Heatsink temp. > shutdown temp. −5°C No reaction 0x4000 C00582