Lenovo ThinkServer TS430 Скачать руководство пользователя страница 112

Страница: 112 / 264

8. Position the new PCI card on the PCI card slot for which you have removed the slot bracket and then

carefully press the PCI card straight down until it is securely seated in the slot. Install the screw to
secure the PCI card in place.

Note:

Your PCI card might look different from the following illustration depending on the specific type.

Figure 47. Installing a PCI card

9. Depending on the type of the PCI card, you might need to connect any required cables. Refer to the

documentation that comes with the PCI card for specific information.

10. Install the PCI card bracket assembly if a RAID card is installed in your server. See “Removing and

reinstalling the PCI card bracket assembly” on page 91.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation, go to “Completing the parts replacement” on page 177.

Removing a PCI card

Attention:

Do not open your server or attempt any repair before reading and understanding the “Safety information”

on page iii and “Guidelines” on page 85.

This topic provides instructions on how to remove a PCI card.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Use any documentation that comes with the PCI card and follow those instructions in addition to

the instructions in this topic.

To remove a PCI card, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

100

ThinkServer TS430 Hardware Maintenance Manual

Содержание ThinkServer TS430









































































































































































































































































Результаты поиска

Содержание ThinkServer TS430

Отзывы:

Похожие инструкции для ThinkServer TS430

Бренды по названию

Популярные бренды

Lenovo ThinkServer TS430, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkServer TS430

Отзывы:

Похожие инструкции для ThinkServer TS430

Бренды по названию

Популярные бренды